Open up Gimp and go to >>>FILE>>>NEW>>>TEMPLATE and pick the>>>A4 SIZE;

209.97 Width,

297.01 Height

in mm. 

2480 Width

3508 Height

in px

>>LOAD FILE or >>>DRAG AND DROP file into Gimp. You can use the resize tool or use shortcut>>>HOLD SHIFT and PRESS R to resize the picture. You might see on the left hand side in the layers panel it says>>>FLOATING SELECTION. >>>RIGHT CLICK on the>>>LAYER and select>>>NEW LAYER now you can resize the picture.

Use the>>>FUZZY SELECT TOOL to select in this case the jagged bit. You can >>>HOLD>>>SHIFT and>>>CLICK on the>>>LEFT BUTTON of the>>>MOUSE to select more than one bit. If you have a bottom layer remove it by>>>CLICKING on the last>>>LAYER and>>>PRESSING DELETE LAYER

With the first layer selected>>>RIGHT CLICK on the picture and hover your cursor over>>>EDIT and>>>PRESS>>>COPY or use shortcut>>>HOLD>>>CTRL and>>>PRESS C to copy the selected bit.

With the first layer selected>>>RIGHT CLICK on the picture and hover your cursor over>>>EDIT and>>>PRESS>>>CUT or use shortcut>>>HOLD>>>CTRL and>>>PRESS X to cut the selected bits. The jagged bit should now be transparent as I did one bit at a time.

With the first layer selected>>>RIGHT CLICK on the picture and hover your cursor over>>>EDIT and>>>PRESS>>>PASTE  or use shortcut>>>HOLD>>>CTRL and>>>PRESS V to paste the selected bits. If you see>>>FLOATING SELECTION in the>>>LEFT HAND SIDE in the LAYERS PANEL>>>RIGHT CLICK on the>>>FIRST LAYER and>>>SELECT>>>TO NEW LAYER>>>EXPORT AS the first frame with a JPG or PNG extension for example 0.jpg or 0.png.

With the first layer selected PRESS the FIRST>>>EYE to hide the layer it should be transparent. If it’s not >>>DELETE the last >>>LAYER in the left hand side>>>LAYERS PANEL and go to >>>LAYER>>>TRANSPARENCY>>>ADD ALPHA CHANNEL.

With the>>>BOTTOM LAYER SELECTED use the>>>COLOUR PICKER to select in this case ANY>>>YELLOW BIT.

With the bottom layer selected Use the>>>PAINT BRUSH to fill in the transparent bit leaving in this case the jagged transparent bit completely yellow. If you can’t see the layers tab go to>>>WINDOWS>>>DOCKABLE DIALOGS>>>LAYERS to make it appear.

Go to>>>IMAGE>>>HOVER over>>>GUIDES and>>>SELECT>>>NEW GUIDE (BY PERCENTAGE) leave the options as they are >>>DIRECTION>>>HORIZONTAL>>>POSITION>>>50.00 and press ok. Now drag the line in the middle of the picture by>>>HOLDING SHIFT and>>>HOLDING the>>>LEFT MOUSE BUTTON or>>>LEFT OF THE TOUCHPAD and dragging into position in this case the>>>BOTTOM of the>>>STICKMAN. Now repeat the step moving the guides now at the>>>TOP of the stickman>>>EXPORT AS changing the file name.

Repeat>>>STEP 3-6  to>>>SELECT>>>COPY>CUT and>>>PASTE the stickman 

With the >>>FIRST or >>>SECOND >>>LAYER>>>SELECTED in the left hand side layers panel>>>HIDE the LAYER by clicking on the on the first or second >>>LAYERS >>>EYE  to hide the layer.

With the>>>BOTTOM LAYER>>>SELECTED fill in the transparent background by using the>>>COLOUR PICKER TOOL and>>>SELECTING the>>>COLOUR in this case >>>SELECTING ANY OF THE YELLOW and using the>>>BRUSH to fill in the hole.

>>>SELECTING the>>>BOTTOM LAYER>>>UNHIDE the>>>LAYER by>>>SELECTING THE LAYERS EYE to make it>>>VISBLE.

I want to make it look like the stickman has banged his head on the hovering object to do this use the>>>MOVE TOOL to move it up slightly and closer to the hovering object>>>EXPORT AS with a different file name when done. You may want to move the stickman closer to the object and>>>EXPORT AS with different file name before doing any of the this step.

Repeat >>>STEP 15 >>>EXPORTING AS  each time you move it up slightly and don’t forget to rename the file I did numbers so this one will be >>>3.jpg or >>>3.png and so forth. Do this until you finished animating the sign in this case until it’s in the original position.

>>>TURN ON the>>>JAGGED EDGE LAYER by>>>CLICKING on the>>>LAYERS EYE SECTION>>>The>>>FIRST or>>>SECOND LAYER in the>>>LAYERS TAB on the>>>LEFT HAND SIDE and>>>EXPORT AS with different file name.

Experiment with>>>COLOURS>>>BUCKET FILL>>>TEXTURES and>>>FILTERS to taste>>>EXPORT AS each time you changed it.

You can use a gif maker like EGIF.com to put the gif together and save as a>>>gif or>>>MP4 file.

Open up Gimp and go to >>>FILE>>>NEW>>>TEMPLATE and pick the>>>A4 SIZE;

209.97 Width,

297.01 Height

in mm. 

2480 Width

3508 Height

in px

>>LOAD FILE or >>>DRAG AND DROP file into Gimp. You can use the resize tool or use shortcut>>>HOLD SHIFT and PRESS R to resize the picture. You might see on the left hand side in the layers panel it says>>>FLOATING SELECTION. >>>RIGHT CLICK on the>>>LAYER and select>>>NEW LAYER now you can resize the picture.

Use the>>>FUZZY SELECT TOOL to select in this case the stickman. You can >>>HOLD>>>SHIFT and>>>CLICK on the>>>LEFT BUTTON of the>>>MOUSE to select more than one bit.

With the first layer selected>>>RIGHT CLICK on the picture and hover your cursor over>>>EDIT and>>>PRESS>>>COPY or use shortcut>>>HOLD>>>CTRL and>>>PRESS C to copy the selected bit.

With the first layer selected>>>RIGHT CLICK on the picture and hover your cursor over>>>EDIT and>>>PRESS>>>CUT or use shortcut>>>HOLD>>>CTRL and>>>PRESS X to cut the selected bits.

With the first layer selected>>>RIGHT CLICK on the picture and hover your cursor over>>>EDIT and>>>PRESS>>>PASTE TO NEW LAYER or use shortcut>>>HOLD>>>CTRL and>>>PRESS V to paste the selected bits.

With the first layer selected PRESS the FIRST>>>EYE to hide the layer it should be transparent. If it’s not >>>DELETE the last >>>LAYER in the left hand side>>>LAYERS PANEL and go to >>>LAYER>>>TRANSPARENCY>>>ADD ALPHA CHANNEL.

With the>>>BOTTOM LAYER SELECTED use the>>>COLOUR PICKER to select in this case ANY>>>BLUE BIT.

With the bottom layer selected Use the>>>PAINT BRUSH to fill in the transparent bit leaving in this case the circle completely blue.   

>>>UNHIDE the LAYER by clicking on the on the first layer eye section to unhide the layer.   

>>>EXPORT AS for the first frame with a>>>JPG or>>>PNG extension for example >>>0.jpg or  >>>0.png.    

Use the>>>SCALE TOOL to scale it up or down slightly. In this case I’m going to make it look like the picture shrink scaling it down each time and>>>EXPORT AS the frame with a >>>JPG or>>>PNG extension at the end of the file name for example>>>1.jpg or>>>1.png. For shortcuts you can HOLD>>>SHIFT and>>>PRESS>>>S to scale the picture down.

Repeat step 12 >>>EXPORTING AS  each time you scaling it down slightly and don’t forget to rename the file I did numbers so this one will be >>>1.jpg or >>>1.png and so forth. Do this until you finished animating the sign. You may want to use the>>>MOVE TOOL to move it back into the centre of the blue circle. 

Experiment with filters, colours and the bucket tool but I rotated the picture once again rotating the picture ever so slightly by using the>>>ROTATE TOOL or use shortcut>>>HOLD SHIFT and PRESS R to rotate the picture and>>>EXPORT AS changing the file name. 

Repeat>>>>STEP 15 until you have down a full circle using>>>EXPORTING AS each time you>>>ROTATE the layer.

Go to>>>EDIT and click on>>>UNDO HISTORY to get the>>>UNDO HISTORY TAB up. And>>>UNDO until you first in this case rotated the layer>>>EXPORT AS changing the file name.

With the first layer selected. Use the>>>FUZZY SELECT TOOL to SELECT a eye but do experiment with other ideas you may have but if not select a eye. You can select the other by>>>HOLDING DOWN SHIFT and>>>CLICKING ON THE LEFT BUTTON OF MOUSE or>>>TOUCH PAD to select>>>BOTH EYES.

With the eyes selected use the>>>BUCKET FILL TOOL and choosing your colour>>>FILL IN the>>>EYES.

Repeat step 18 until you feel you have changed it enough times or you have ran out of colours or textures. Don’t forget to>>>EXPORT AS for each time you changed the colour and renaming each file.

>>>OPEN ANOTHER FILE or>>>DRAG AND DROP into Gimp. I want to animate the eyes even more and selected a round transparent background picture in this case a radiation sign. Before you do that with the eyes selected go to>>>EDIT>>>CUT or use the shortcut by>>>CTRL>>>X to cut the layer leaving the original colour for the eyes.

If it says>>>FLOATING SELECTION in the>>>LEFT HAND SIDE LAYERS PANEL>>>RIGHT CLICK on the layer and press>>>TO NEW LAYER

Use the>>>SCALE TOOL to >>>RESIZE image so in this case it fits the eye. You can use the shortcut by>>>HOLDING SHIFT and>>>PRESSING>>>S to resize the image.

With the top layer selected>>>RIGHT CLICK on>>>FIRST LAYER and>>>PRESS DUPLICATE LAYER and use the >>>MOVE TOOL on any of the >>>FIRST TWO LAYERS and >>>MOVE the layer  into the other eye.

With the top layer selected>>>RIGHT CLICK on>>>FIRST LAYER and>>>PRESS>>>MERGE DOWN and use the >>>OPACITY in the >>>TOP of the>>>LAYERS TAB on the>>>LEFT HAND SIDE >>>to make the layer>>>INVISBLE>>>EXPORT AS file and slowly use the>>>OPACITY to bring the picture back in. 

Repeat >>>STEP 25 until the layer is in its original state slowly bring in the>>>OPACITY back in and>>>EXPORT AS each time you changed the opacity in the>>>LAYERS SECTION.

Go to>>>EDIT>>>UNDO HISTORY and>>>UNDO just before you merged down the layers.

With the>>>FIRST or SECOND LAYER SELECTED use the>>>ROTATE TOOL to>>>ROTATE it slightly and>>>EXPORT AS with a different file name. You can use the shortcut by>>>HOLDING SHIFT and>>>PRESSING>>>R to rotate options to come up. If you can’t see the layers tab go to>>>WINDOWS>>>DOCKABLE DIALOGS>>>LAYERS to make it appear.

With the other>>>LAYER SELECTED use the>>>ROTATE TOOL to>>>ROTATE it slightly and>>>EXPORT AS with a different file name. You can use the shortcut by>>>HOLDING SHIFT and>>>PRESSING>>>R to rotate options to come up. You can also use the>>>MOVE TOOL to move it back into place. If you can’t see the layers tab go to>>>WINDOWS>>>DOCKABLE DIALOGS>>>LAYERS to make it appear.

Repeat>>>STEP>>>28 and>>>29 until you have done the full circle or animated enough>>>EXPORT AS each time you rotated both >>>TOP>>>LAYERS.

Experiment from here or you are done. I>>>SELECTED all the>>>LETTERS by using the>>>FUZZY TOOL and>>>HOLDING SHIFT and>>>DRAGING DOWNWARDS to>>>HIGHLIGHT the>>>OUTER FRAME the>>>WHITE BACKGROUND. Then I went to>>>EDIT>>>COPY>>>EDIT>>>CUT>>>EDIT>>>PASTE AS >>>NEW LAYER or shortcuts>>>HOLD CTRL and>>>PRESS C to copy the layer, >>>CTRL and>>>C to CUT the LAYER and>>>CTRL V to>>>PASTE back the layer leaving the images, background and text and a transparent background for the outer parts. 

Go to>>>LAYER>>>ADD NEW LAYER and drag the layer at the>>>BOTTOM in the>>>LEFT HAND SIDE LAYERS PANEL.

Now experiment again with the>>>OUTER TRANSPARENT BIT that is HIGHLIGHTED. Use the>>>BUCKET FILL, >>>TEXTURES, >>>FILTERS and>>>COLOURS to taste. Don’t forget to>>>EXPORT AS each time you>>>CHANGE the>>>BACKGROUND for moving backgrounds.

You can use a gif maker like EGIF.com to put the gif together and save as a>>>gif or>>>MP4 file.

Open up Gimp and go to >>>FILE>>>NEW>>>TEMPLATE and pick the>>>A4 SIZE;

209.97 Width,

297.01 Height

in mm. 

2480 Width

3508 Height

in px

>>LOAD FILE or >>>DRAG AND DROP file into Gimp. You can use the resize tool or use shortcut>>>HOLD SHIFT and PRESS R to resize the picture. You might see on the left hand side in the layers panel it says>>>FLOATING SELECTION. >>>RIGHT CLICK on the>>>LAYER and select>>>NEW LAYER now you can resize the picture.

 

Use the>>>FUZZY SELECT TOOL to select in this case the stickman. You can >>>HOLD>>>SHIFT and>>>CLICK on the>>>LEFT BUTTON of the>>>MOUSE to select more than one bit.

With the first layer selected>>>RIGHT CLICK on the picture and hover your cursor over>>>EDIT and>>>PRESS>>>COPY or use shortcut>>>HOLD>>>CTRL and>>>PRESS C to copy the selected bit.

With the first layer selected>>>RIGHT CLICK on the picture and hover your cursor over>>>EDIT and>>>PRESS>>>CUT or use shortcut>>>HOLD>>>CTRL and>>>PRESS X to cut the selected bits.

With the first layer selected>>>RIGHT CLICK on the picture and hover your cursor over>>>EDIT and>>>PRESS>>>PASTE or use shortcut>>>HOLD>>>CTRL and>>>PRESS V to paste the selected bits.

If you see on the left hand side panel in the layers panel>>>FLOATING SELECTION>>>RIGHT CLICK on the layer and select>>>NEW LAYER 

With the first layer selected PRESS the FIRST>>>EYE to hide the layer it should be transparent. If it’s not >>>DELETE the last >>>LAYER in the left hand side>>>LAYERS PANEL and go to >>>LAYER>>>TRANSPARENCY>>>ADD ALPHA CHANNEL.

With the bottom layer selected and using the>>>COLOUR PICKER select in this case any yellow bit that’s not transparent.    

With the bottom layer selected Use the>>>PAINT BRUSH to fill in the transparent bit leaving in this case the triangle completely yellow.    

>>>UNHIDE the LAYER by clicking on the on the first layer eye section to unhide the layer.    

Use the>>>ROTATE TOOL to move it slightly. In this case I’m going to make it look like he’s falling so move it just slightly and>>>EXPORT the frame with a >>>JPG or>>>PNG extension at the end of the file name for example>>>0.jpg or>>>0.png. For shortcuts you can HOLD>>>SHIFT and >>>PRESS>>>R to rotate the stickman.    

Repeat step 12 >>>EXPORTING AS  each time you move it slightly and don’t forget to rename the file I did numbers so this one will be >>>1.jpg or >>>1.png and so forth. Do this until you finished animating the sign. 

Repeat step >>>3-7 to do the letters if you want to animate them or don’t to leave the bottom half still.

>>>TURN OFF THE LAYER by>>>CLICKING ON THE FIRST EYE in>>>THE LAYERS TAB on the>>>LEFT HAND SIDE. >>>and EXPORT the file. 

Repeat>>>>STEP 15 5-10 times>>>EXPORTING AS each time you turn on and off the layer.

You can use a gif maker like EGIF.com to put the gif together and save as a>>>gif or>>>MP4 file.